Atlas Copco oil separator 2901085800=1613984001

Main purpose: Separate oil and gas mixtures in compressed air.
Filter material: Usually use ultra-fine glass fibre composite filter material.
Filtration efficiency: It can filter out the misty oil-air mixture in compressed air with an efficiency of over 99.9%.
Design flow rate: A specific flow rate is adopted to ensure the operation under the working conditions of intake air temperature not higher than 110℃ and pressure from 0.7MPa to 1.0MPa.
Inlet air temperature and pressure: compressed air with oil content up to 3000mg/m3 before filtration and 5mg/m3 after filtration.
More Products
3001527012 No
3001527007 No
2902021200 No
1617616501 No
1089064103 No
1623357100 No
2901990019 No
2906096400 No
2906101100 No
1630058904 No
1623037500 No
2901990029 No
2901170000 No
2901170100 No
3001531150 No
3001500569 No
1630040899 No
2200902751 No
2200902017 No
EP1071-359 ROTOR (HS)
254418-321 ROTOR (LS)
262898-GR1 SHIM ELLIOTT
262898-GR1 SHIM
232488-GR1 SHIM PACKAGE
1901003238 RING,PSTN
1901000175 RING,PSTN
1901003371 PISTON,HLF,140MM
1901003387 PISTON,HLF,140MM
1901003628 COVER,LP/HP，CONTAINS:CYLINDER,NUT,GASKET
1901000216 NUT
1901000186 RING,PSTN
1901003372 PISTON,HLF,250MM
1901901265 JOINT,SET
1901004156 RING,THRST
5929010110 1st stage air filter
1624184305 filter element
1624184306 filter element
1622311050 pinion
1622311049 pinion
2901200409 filter kit
1617709902 filter
2906097900 filter